Air Filter Replacement
Duration: 15 minutes
How often: Every 15,000 miles
Air filter test:
Shine a flashlight from the inside out of your air filter. If you can’t see any light or very little light, it needs to be replaced. Change the breather filter and check the PCV at the same time. On most cars, this is a fairly simple procedure.
Things you’ll need from your garage or your local NAPA AUTO PARTS Store:
• Flat-Head/Phillips screwdrivers
• Adjustable or open-end wrench
• New air filter
• New breather filter (if so equipped)
Look under the hood and find the air filter housing.
It will likely be square (on fuel-injected engines) or round (on older carbureted engines) and about 12 in. (30 cm.) in diameter. On older vehicles, it will be in a large round housing on the top of the engine. On newer vehicles, it will be on the end of the large black intake hose opposite the engine mounted on one of the fender wells.
Remove screws or clamps.
Use a screwdriver to remove the screws or clamps that hold on the top of the housing. If you have an older vehicle with the round air filter housing, remove the wing nut holding the air filter cover and any other clips.
Remove the old air filter.
Take out the old air filter and clean any dirt and debris from the housing with a clean rag. Be careful that none falls into the carburetor or the intake. Remove the breather filter.
Install the new air and breather filters.
Replace the air cleaner top. Reinstall the attaching hardware and air intake hose (if applicable).
• When the air filter is out, you should replace the PCV filter as well. It should only take 5 minutes.